Floating Dredger

Floating Dredger
Product Details

Basic Info

  • Model NO.: JLCSD300

  • Dredging Depth: 10m

  • Control System: PLC System

  • Discharge Distance: 1000m

  • Trademark: JULONG

  • Origin: Qingzhou City, Shandong Province, China

  • Type: Dredger

  • Water Flow: 1200m3/H

  • Engine: Weichai/Cummins/Jichai

  • Pump: Shijiazhuang Pump, Warm Technology

  • Mining Object: Sand, Mud, Slurry, Silt, Slush, Sludge, Salt, Iron

  • HS Code: 89051000


Product Description

Floating dredger

The Cutter Suction Dredger of steel construction, the non self-propelled, dismountable type, is able to berth and dredge at any waters both in the coastal area and inland rivers, with similar conditions to that in navigation area "A" or below the "A"-line specified in code for inland river steel engineering ship manufacture of P. R. China.

The dredger can be used to excavate and transport cohesive sediment below the class III specified in code for dredging engineering construction technique issued by Ministry of Water Resources(MWR) of P. R. China.

The hull consists of three pontoons, one main pontoon (engine room), two side pontoons. All parts are dimensioned to allow the JLCSD300 dredger to be transported by road, rail or water. The dredger is equipped with a rapid connection-disconnection system for the pontoons, achieved using bolts at deck level, hull front and rear, and hooks at the bottom. Further salient features of the dredger are the dredger is powered by a Marine engine. The main engine is to drive the dredge pump and hydraulic pump. Hydraulic pump will in turn power other all equipments such as cutter, swing and ladder winches, and the spud rams etc.
The hull is of all welded, steel construction to give the dredger the necessary strength required for dredging operations. The side pontoons are connected to the main pontoon by means of bolts.
The hull steel plate used is CCSB (shipbuilding steel plate ).

Features:
1. One-man operation. The most advanced PLC control system.
2. New highly effective cutter/wheel drive system
3. Reliable hydraulic system.
4. Fresh water cooling system
5. Completely assembled and fully tested before delivery
6. Very simple and fast assembly, afloat of onshore
7. Standard design, allowing short delivery times
8. Standard spare parts available from stock
9. Designed as standard to qualify for Coastal Waters Certificate

10. Optional equipment available


Over length 25m
Hull Depth 1.6m
Over width5.4m
Cutter Dia 1.3m
Water Flow 1200M3/H
Pump 12/10 G-G
Main PowerCummins KTA19
Generator 24KW
Suction/Dishcarge Pipe 300mm/300mm
Discharge Distance 1000m
Spuds 377mm ; 13m ; 
Winch 3 Sets
Operation System PLC control system
Weight 40 Ton
Solid Capacity 100-150 m3/h
Digging Depth 1-10m(Normally)


Feedback
[[ImgSrc-PhoneChat]]